10400mAh should charge within 12 hours for a standard 1A charger. I have a 10400 Mi Power Bank but it take >24 hours to charge.
I contacted Xiao Mi Support and indeed this is not normal. They suggested to Reboot the power bank. To do that:
Press the Power Button for more than 15 secs.
After that drain the power bank and charge again. The power bank should fully charge about 12 hours or in some case 13 hours is fine.
The support person also suggested if the unit still behaves the same, we should bring it to the nearest service center for checking. http://www.mi.com/my/service/repair/
I have a Cannon Wireless MG3170 All-in-one printer and I use it on my "Memory On Cloud Project". The project is to scan all my childhood pictures ( before Digital Camera was even born) into cloud storage to share with all my siblings and relatives.
There is a scan Feature in MG3170 which allow you to quick scan a file into computer without operating through Computer. This is extremely helpful when you do them in bulk.
When I press it, it does nothing but shows green code with E31.
I know this might be due to some configuration issue and a little bit of research apparently this scan button only works in wired connection, aka usb connection.
Below are all the others ERROR Code that I find them usefull when come in handy. Hence this blog. Cause and Solution ( From :http://support-sg.canon-asia.com/contents/SG/EN/8201156800.html#25)
E, 0, 2
The machine is out of paper./Paper does not feed.
E, 0, 3
E, 0, 4
The FINE cartridge is not installed properly.
E, 0, 5
What is the hardness level of Malaysia water source? According to Wikipedia, water is classify as soft water when the hardness is below 60 mg/L, below 60 ppm or below 3.5gpg ( grain per gallon) .
( Hard/ Soft Calssification Table, Source: Wikipedia - Hard Water ) * Parts per million (ppm) is usually defined as 1 mg/L CaCO3. It is equivalent to mg/L One recently study on Kuala Lumpur Tap Water in 2007 has shown that most populated areas in Kuala Lumpur are soft water. (source: A Survey Of Tap Water Quality in Kuala Lumpur - March 2007 ) Also commentary of the study has confirmed that piece of finding. "As shown in ﬁgure 3, the hardness of tap water in these20 selected areas ranged from 48 mg CaCO3/L to 92 mgCaCO3/L with an average of 65 mg CaCO3/L. The tapwater in all these areas is considered soft as the hardnesslevel is below 100 mg CaCO3/L. Although there is nohealth-based guideline value, soft water and low pH maycause corrosion of pipes resulting in the presence of certainheavy …